Product category

Loading...

CLV-50

Check valves are general purpose luminaires and have application areas for liquids, gases and steam. They increase operational safety and can replace complicated luminaires.

The working part of the check valves is a hinged disc. This disk can move freely on the hinge pin in one direction. Automatically works with fluid movement. As the fluid flows in one direction, the disc opens to allow passage. If it is flowing in the opposite direction, the disc closes. Thus, the flow on the line on which the check valve is attached is unidirectional.

Ayvaz CLV-50 Spring Check Valves are of great importance for all installations. Check valves are the most important armatures to be taken against the knock impacts that damage the steam installation and armatures.

SPECIFICATION

Material Structure:

Body : GG-25 Cast Iron

Interior : AISI 304 Stainless Steel

Connections : Flanged

Nominal Diameter : DN15 (1/2 ”) – DN300 (12”)

Pressure Values : Max. Up to 16 bar

Temperature Range : -10 ° C to 180 ° C depending on the material structure.

Applications : -Steam -Hot water – Hot/ cold water -Non-acid fluids -Chemical fluids – Compressed air